|
MG-34 Parts
Updated 3/9/2010
MG-34 Cut Receviers ($225)
Original WW2 cut receivers. There is a small section missing between the front and middle sections.
MG-34 / XMG 308 Conversion ($700 for all parts)
• Newly manufactured barrel with original barrel collar ($465)
• 2 caliber feed tray with removable spacer that can be used for both 8mm & 308. ($150)
• Reduced diameter booster cone ($35)
• Front Feed Pawl that can be used for 8mm & 308 ($30)
• Link guide attached to feed tray ($15)
This setup will enable the MG-34/XMG to use WW2 belts, 308 belts, or M60/M13 links
 308 Feed Tray with M13/M60 Link Guide:
How It Works
Once the original feed block is modified to assist 308 feeding, it will continue to function with 8mm as well. At this point, simply switch the quick-detach barrel and feed tray to your desired caliber. Since 308 is a lower-pressure round than 8mm, you may want to replace the 8mm booster with the 308 booster to increase the cyclic rate. Be careful not to use the 308 booster when firing 8mm.
MG34 Original Blank Barrel (barrel only - no stem) $150 SOLD
MG34 Collector Bolts
1. WaA26 complete bolt with early tail lock and early EXTRACTOR, and lots of nice amps ($350)
2. 'csd' code phosphate-coated bolt assembly ($350)
This is the one of the only phosphate-coated bolts I've seen
945 code (Waffenfabrik Brünn AG, Brno, Czechoslovakia) on carrier
Acid-etched WaA13 on head
3. 'ghj' marked phosphate-coasted bolt assembly ($275)
chrome-plated roller support
WaA18 on carrier
4. WaA214 (Sauer und Sohn, Suhl) bolt assembly ($350)
Early-pattern tail lock and extractor
WaA607 marking present as well
WaA214 on extractor, cartridge pusher, and tail lock
6. 936 / WaA4 (Gustloff-Werke Weimar 1940) ($200)
mismatched numbers on bolt and carrier but same manufacturer & year
WaA4 on most parts
7. 'cof' marked bolt assembly ($300)
this is the only 'cof' (Eickhorn, Solingen) bolt head I've ever seen
'jwh' logo on carrier: According to some online sources this is Waffenfabrik, Chatellerault (France)
MG34 Bolt Tune-up Kit ($35)
Includes new production/long ejector pin, 2 roller clips, and extractor spring
Individual Parts
16) Bolt Roller Spring Clip (the part that holds the rollers to the bolt / new production): $8 ea
17) Bolt Extractor Sping: $5 (new), $4 (original)
18) Bolt Ejector Pin: $25 (new), $10 (original)
Exact Reproduction Grip Screws: $12 per set
 Trigger Pack Disconnector Lever with Spring and Stud $10
MG-34 Pin Set ($4 for all 4 pins)
MG-34/42 Trigger Housing Pin Punch Set ($20 for both tools)
A must have for all MG34 and MG42 owners
The Pin Start tool has a conical lead-in that precisely compresses the 'male' 34/42 trigger housing pin spring tabs. The Pin Follower tool pushes the 'male' pin through the inner diameter of the 'female' 34/42 trigger housing pin .
MG34 & 42 Grip Scerw Tools: $4 per bit
 SOLD OUT
1) Firing Pin Trip with Pin & Spring (bolt part that trips the firing pin) $15 (2 for $20)
2) All 3 parts for $17.50:
a. Recuperator / Short-Recoil Piston Spring (new production): $10
b. Recuperator Piston (new production): $15
c. Recuperator Piston retaining pin: $1
3) Firing Pin: $30, Firing Pin Spring: $10 (SOLD OUT)
4) Bipod: $125
5) Safety Lever $40
6) Buffer Spring & Piston $15
7) Sear with Spring and Pin, Sear with Pin (early or late style available): $40
8) Ejection Port Cover w/ Rod and Spring (early or late style available): $3
9) Firing Pin Catch & Tail Lock: $15
10) MG-34/42 Trigger Housing Pins (1 male, 1 female): $8 per set
11) • Trigger Housing Complete w/ Alum Grips: SOLD OUT
• Trigger Housing Complete w/ Bakelite Grips: SOLD OUT
•Complete Internal Parts Without Frame or Grips: SOLD OUT
• Exact Reproduction Grip Screws: $12 per set
12) Buffer Assembly: $50 (SOLD OUT)
13) Booster Cone (original or reduced diameter for 308): $35
14) Charging Handle: SOLD OUT
15) Front AA Post/Sling Swivel: $40
16) Bolt Roller Spring Clip (the part that holds the rollers to the bolt / new production): $8 ea 
17) Bolt Extractor Sping: $5 (new), $4 (original)
18) Bolt Ejector Pin: $25 (new), $10 (original)
19) Extractor (with spring and plunger) : $35
MG34 Receiver Cross Section Slivers: these were drops from saw cuts we made on the receivers ($5 / set)
Unique Lots
Early MG34 Cut Receiver (rate-adjustable pattern) ($375)
sn 271
WaA4 X 3 on top and X 3 on left side
extra long front cut piece
WaA11 Parts ($215)
3 grip screws (2 have clover logo)
4 grip nuts (1 has 5A marking as well)
sear lever
sear pin
buffer latch
trigger spring bar
bolt with markings WaA11/5A and WaA18
WaA63 parts ($50)
first pattern sear lever for adjustable rate gun
ejector plate
945 code (Waffenwerke Brunn in Cz 1940) bolt and barrel this is the first Brunn code after the Germans took over ($325)
barrel shaft is marked 14a-1940, 1208-002, 28, WaA807 & WaA63
excellent chamber and bore
barrel collar is marked WaA63 and 945
bolt head is marked 945 and WaA214 on some parts
9191 Bakelite Stock $200
non-matching collar
minor blems on bakelite but no major flaws or cracks
7177 old / ugly German stock ($100)
WaA26 (Mauser) on latch
number on wood not readable
wood cracked on side and top but still sound
other minor blems
5486 ($75)
odd German stock with knot on wood
usual crack on left side but sound
collar does not fit well
8758 - very nice looking German stock with buffer ($180)
non-matching parts
crack on top but sound
WaA11 (Maget) markings on buffer
4465 nice German stock ($125)
unual crack at top but still sound
minor pressure dents on right side
5357 ($150)
original wood stock with matching number penciled on collar
stock was painted black at some point and paint is falling off
WaA11 (maget) marking on rear screw
great / unique shape to wood
MG34 Transit Chest (Reproduction) $295
This useful box is a faithful reproduction of the original transit chest with latches and carry handles. It's designed to hold the gun, bipod, gunner's kit, 2 barrel carriers, basket drum, and some loaded belts. The box shown has reproduced Nazi 'chicken' proof marks.
50 RD BELTS WITH WW2 MARKINGS
1937 DATED BELT: $75 EA
1938 DATED BELT: $50 EA
1939 DATED BELT: $40 EA
1940 DATED BELT: $25 EA
1941-42 DATED BELT: $20 EA
LATE WAR BELT: $20 EA
WW2 STARTER TAB: $15
WW2 Steel Double-Hinged Can w/ Sealing Gasket: $75 ea
 
double hinge hdk 44 can marked "Patr Kast 41 f MG"
with 1 cvc starter tab and 5 cvc late pater belts ($100)
301-807-5234
info@brpguns.com
| 
