308 Conversion Parts

MG34 7.62 NATO Conversion (Complete with Newly Made Tray)

MG-34 / XMG 308 Conversion (7.62 NATO) Includes 1)  Newly manufactured barrel with original WW2 barrel collar Barrel Material: CrMoV - GBQ Commonly called "CMV" This durable material was imported from a specialty steel manufacturer in Germany...

MG34 308 & 8mm Feed Tray - newly machined

Newly machined two caliber feed tray with removable spacer that can be used for both 8mm & 308/7.62x51 NATO.  Material: 1018 CR Steel with FNC plating (Ferritic Nitro Carburizing) Includes Spacer and Screw for use with the shorter 7...

MG34 7.62 NATO Conversion (without tray)

MG-34 / XMG 308 Conversion (7.62 NATO) • Newly manufactured barrel with original WW2 barrel collar Barrel Material: CrMoV - GBQ Commonly called "CMV" Headspace is set to the 7.62 NATO spec.  We can do the tighter .308 spec upon request...

MG34 Blank Fire Booster Cone with Three Restrictor Screws

MG34 Booster Cone For Blank Firing. Includes: • Cone Threaded 7/16-20.   • Three Restrictor Screws: - 1/8" through hole: This is for more powerful blanks. - 1/16" though hole: This setups worked well with British L13A1 blanks...

Blank Fire Booster Cone Plug - .0625 Orifice

Blank Fire Booster Cone Plug .0625" (1/16")  Orifice Includes: •  Threaded 7/16-20 • 1/16" through hole • 1/2" wrench flats • Material: 303 stainless

Blank Fire Booster Cone Plug - .125 Orifice

Blank Fire Booster Cone Plug .125" (1/8")  Orifice Includes: •  Threaded 7/16-20 • 1/8" through hole • 1/2" wrench flats • Material: 303 stainless

MG34 7.62 NATO Conversion with Feed Block (Tray NOT Included)

MG-34 / XMG 308 Conversion (7.62 NATO) Includes: • Original Feed Block Assembly with Front Feed Pawl installed that can be used for 8mm & 308 • Feed Tray Front Spacer:  This spacer is designed to be removable from the tray so it can...

MG34 308 Barrel (7.62 NATO)

Newly manufactured barrel with original WW2 barrel collar. Barrel Material: CrMoV - GBQ Commonly called "CMV" Headspace is set to the 7.62 NATO specification.     This durable material was imported from a specialty steel manufacturer...

MG34 308 Booster

Reduced diameter booster cone  Useful part for a weak-cycling 8mm gun or 308 conversion.   The MG34 is a Short-Recoil operated gun.  When the bullet reaches the muzzle, the recoil and excess propellant gases enter the booster area and...

MG34 M13/M60 Link Guide

Link guide attached to feed tray ($15) This can only be used with trays that have the left side rear anti-tilt block removed.  The newly manufactured BRP trays have the anti-tilt block in place so these cannot be used.  

MG34 Front Feed Pawl - 308/8mm

Front Feed Pawl that can be used for 8mm & 308.  Improves feeding by keeping pressure on the cartridge as its being pushed forward.   It will allow the shorter 308 round to feed and improve feeding for 8mm.  - New...

MG34 308 Tray Spacer

Requires feed tray to be drilled and countersunk (82deg) on bottom for attaching screw.   -Stainless Steel This spacer is designed to be removable from the tray so it can be switched back to 8mm if desired. The 308 front spacer is installed by...

Low Grade Nazi marked: Laufschützer 34, MG34 barrel carrier (unconverted)

Original Item: MG34 Barrel Carrier (Laufschützer 34)  Not the actual item pictured NOT CONVERTED FOR USE WITH MG42 BARRELS Production Variations: * Some were manufactured with the holdopen bar and some were not. * Some have aluminum insert...

Nazi marked: Laufschützer 34, MG34 barrel carrier (unconverted)

Original Item: MG34 Barrel Carrier (Laufschützer 34)    NOT CONVERTED FOR USE WITH MG42 BARRELS Production Variations: * Some were manufactured with the holdopen bar and some were not.  * Some have aluminum insert and some have...

Low Grade Nazi marked: Laufschützer 34, MG34 & MG42 barrel carrier (converted)

Original Item with WW2 German Markings: MG34 Barrel Carrier (Laufschützer 34) later converted for use with both MG34 and MG42 barrels. Note the rectangular sheet metal modification to accommodate the wider MG42 barrel collar.   CONVERTED FOR...

220225-05: Nazi marked: Laufschützer 34 with Israeli MG34 8mm Chrome Lined Barrel - Ships Free in Lower 48

Orignal ItemsActual Items PicturedCondition As Shown Be sure to select Free Shipping at checkout.   Lot Includes: Original Barrel Carrier -  Repainted with Yugo Sling.   Laufschützer 34 pattern   Mfg Code" bxt" (Fr...

220225-02: Nazi marked: Laufschützer 34 Dated 1943 with 1940 Dated MG34 Barrel - Ships Free in Lower 48

Orignal ItemsActual Items PicturedCondition As Shown Be sure to select Free Shipping at checkout.   Lot Includes: Original Barrel Carrier - Yugo Repainted with Yugo Sling.   Laufschützer 34 converted to dual use for 34 and 42...

Lot 9: Nazi marked: Laufschützer 43, MG34 & MG42 barrel carrier with MG34 Barrel

Orignal Items Actual items picturedCondition as shown Includes: Original Barrel Carrier with Post War Sling with German Markings Yugo re-arsenal German MG34 8mm barrel. Chamber and bore are very good. Shaft markings have been scrubbed.

Nazi marked: Laufschützer 34, MG34 & MG42 barrel carrier (converted)

Original Item with WW2 German Markings: MG34 Barrel Carrier (Laufschützer 34) later converted for use with both MG34 and MG42 barrels. Note the rectangular sheet metal modification to accommodate the wider MG42 barrel collar.   CONVERTED FOR...

Low Grade Nazi marked: Laufschützer 43/1, MG34 & MG42 dual purpose barrel carrier (ribbed)

Original Item with WW2 German Markings: MG34 & MG42 Dual Purpose Barrel Carrier - Rare Ribbed Pattern Not the actual item pictured     FOR USE WITH BOTH MG34 & MG42 BARRELS   These came out of Yugoslav arsenals and were...

Low Grade Nazi marked: Laufschützer 43, MG34 & MG42 dual purpose barrel carrier (smooth)

Original Item with WW2 German Markings: MG34 & MG42 Dual Purpose Barrel Carrier - smooth pattern   FOR USE WITH BOTH MG34 & MG42 BARRELS   These came out of Yugoslav arsenals and were typically repainted after WW2.  Slings may...

Nazi marked: Laufschützer 43, MG34 & MG42 dual purpose barrel carrier (smooth)

Original Item with WW2 German Markings: MG34 & MG42 Dual Purpose Barrel Carrier - smooth pattern   FOR USE WITH BOTH MG34 & MG42 BARRELS   These came out of Yugoslav arsenals and were typically repainted after WW2.  Slings may...

Nazi marked: Laufschützer 43/1, MG34 & MG42 dual purpose barrel carrier (ribbed)

Original Item with WW2 German Markings: MG34 & MG42 Dual Purpose Barrel Carrier - Rare Ribbed Pattern   FOR USE WITH BOTH MG34 & MG42 BARRELS   These came out of Yugoslav arsenals and were typically repainted after WW2.  Slings...

5x MG3/MG34/42 NATO 7.62/308 Belt (German post war) BENT/BROKEN LINKS and SURFACE BLEMS

Original German NATO 7.62 x 51 belts for MG1, MG3, Steyr 74 as well as 308/7.62 converted MG34s and MG42s.   THEY HAVE SOME BENT/BROKEN LINKS AND MODERATE RUST SPOTS, BUT MOST LINKS ARE PERFECTLY USEABLE.  German 7.62 NATO belts work...

MG3/MG34/42 NATO 7.62/308 Belt (German post war) - New Old Stock

New Old Stock: Original German NATO 7.62 x 51 belts for MG1, MG3, Steyr 74 as well as 308/7.62 converted MG34s and MG42s.   Belt Info: German 7.62 NATO belts work for both 8mm and 7.62 NATO Pre-1941 German solid / loose-type belts work or...

Set of Yugo 8mm Ammo Can with 5 x MG3/MG34/42 NATO 7.62/308 Belt (German post war) SURFACE BLEMS

Includes: 5 x Betls THEY HAVE SOME MINOR RUST SPOTS BUT ARE PERFECTLY USEABLE.  (German 7.62 NATO belts work for both 8mm and 7.62 NATO) 1 x Fair condition Yugo 8mm Ammo Can  (ALL CAPACITY SHIPPING RESTRICTIONS...

HK21 Belt Set (1 starter tab with 5x50rd belts) - Excellent Condition

Original Items. Excellent Condition  Includes 1 x Starter tab: note that this tab has the female section as the connecting end rather than the male indicating that is designed to feed from left-to-right with the open side 'up' as with an HK 21...

MG3/MG34/42 NATO 7.62/308 Belt (German post war) SURFACE BLEMS

Original German NATO 7.62 x 51 belts for MG1, MG3, Steyr 74 as well as 308/7.62 converted MG34s and MG42s.   THEY HAVE SOME MINOR RUST SPOTS BUT ARE PERFECTLY USEABLE. German 7.62 NATO belts work for both 8mm and 7.62 NATO   Belt...

MG34 Mount Adapter for MG42/53 Lafette Tripod and M60 Pintle

Finding and MG34 tripod can be very difficult and expensive.  This adapter set allows a standard MG34 to fit and function on an MG42 or M53 lafette (tripod) as well as an M60 “gooseneck” pintle.   This adapter set...

MG34 Mount Adapter for MG3 Tripod and M60 Pintle

Finding and MG34 tripod can be very difficult and expensive.  This adapter set allows a standard MG34 to fit and function on an unmodified** MG3 lafette (tripod) as well as an M60 “gooseneck” pintle.   On the MG3 tripod the...

MG34 Muzzle Cover - Original (Frayed Pull-Strings)

Original Item: 1 piece included Rare find of original WW2 rubberized canvas muzzle cover with string tie commonly found in MG34 gunner kits. These are designed to be shot through for immediate use. Condition: new old stock

MG3/MG34/42 NATO 7.62/308 Belt (German post war) - Very Good Condition

Original German NATO 7.62 x 51 belts for MG1, MG3, Steyr 74 as well as 308/7.62 converted MG34s and MG42s.   Belt Info: German 7.62 NATO belts work for both 8mm and 7.62 NATO Pre-1941 German solid / loose-type belts work or both 8mm and 7.62...

MG34 - MG42 - M53 Broken Shell Tool

Original Item: Excellent condition  

MG34 Barrel Collar Pin

Original Item: Retaining pin used to lock MG34 barrel and collar together.

MG-34, MG42, M53 Hot Barrel Mit; Yugo, Glove Type - Minor Stains

- Yugoslavian Manufactured - Full Glove Type - Some Stains - generally as pictured.

MG-34, MG42, M53 Hot Barrel Mit

Yugo mfgLooks like German WW2 flat type with leather strap.    

MG34 Mainspring - New Repro

Copy of Original Mainspring Pictured is a comparison between our new mainsprings and a worn original mainspring