MG34 Blank Fire Booster Cone with Three Restrictor Screws

MG34 Booster Cone For Blank Firing. Includes: • Cone Threaded 7/16-20.   • Three Restrictor Screws: - 1/8" through hole: This is for more powerful blanks. - 1/16" though hole: This setups worked well with British L13A1 blanks...

Blank Fire Booster Cone Plug - .0625 Orifice

Blank Fire Booster Cone Plug .0625" (1/16")  Orifice Includes: •  Threaded 7/16-20 • 1/16" through hole • 1/2" wrench flats • Material: 303 stainless

Blank Fire Booster Cone Plug - .125 Orifice

Blank Fire Booster Cone Plug .125" (1/8")  Orifice Includes: •  Threaded 7/16-20 • 1/8" through hole • 1/2" wrench flats • Material: 303 stainless

MG-34 Pin set

All of the pins are newly manufactured. Countersunk on both ends, just as the originasl, for peening. Includes: 1 x Buffer Latch Pin 1 x Sear Lever Pin 1 X Recuperator Retaining Pin 1 x Top Cover Hinge Retaining Pin Finish: Black

MG-34 Buffer Latch Retaining Pin

This is a reproduction of the retaining pin for the buffer latch.  The same pin is used for retaining the sear lever.  It is countersunk on both ends, just as the original, for peening.     Finish: Black

MG-34 Sear Lever Pin

This is a reproduction of the retaining pin for the sear lever.  The same pin is used for retaining the buffer latch.  It is countersunk on both ends, just as the original, for peening.     Finish: Black

MG-34 Bolt Catch Lever Pin

This is a reproduction of the retaining pin for the bolt catch lever in the barrel jacket.  The same pin is used for the top cover hinge retaining pin.  It is countersunk on both ends, just as the original, for peening...

MG34 to MG42 Bipod / AA mount Adapter

Milled steel adapter designed to adapt the front or rear bipod mounts on the MG34 barrel jacket to use common MG42 or MG3 bipods on AA mounts.       One of our mounts is featured in this video at 22:00 min.  

MG-34 Top Cover Hinge Retaining Pin

This is a reproduction of the retaining pin for the top cover hinge pin.  The same pin is used for the bolt catch lever in the barrel jacket.  It is countersunk on both ends, just as the original, for peening.    Finish: Black

MG34 Charging Handle Cocking Piece - Newly Made

Newly Made Item   This is a machined and hardened steel replacement part for the MG34 charging handle.  The cocking piece is the part that contacts the bolt carrier to charge the gun. Rather than being held by 2 rivets, we have made this...

Lot 24: 5 x MG34 Barrels - 8mm (Ships Free in Lower 48)

Actual Items Pictured Condition as shownOriginal Items:   Lot includes: 3 excellent condition Israeli 8mm barrels  - 1 of these barrels has an external rust spot (see pics)  - Note that the Israeli barrels may have some durability...

MG34 Barrel Collar Pin

Original Item: Retaining pin used to lock MG34 barrel and collar together.

MG34 Cut Barrel Section

German WW2 Rear Barrel Section with Locking Collar Removed 6.5" Long  

MG34 Gunner's Pouch

Yugo mfg: MG34 Gunner’s Pouch   Original Items: yugo mfg - pouch - brass catcher (HAS  MODERATE RUSTING AND/OR PITTING) - hot barrel mitt - jag  - cleaning rod - chamber brush - pick - 2 oil bottles - muzzle wrench -...

Deluxe MG34 Gunner Kit

Yugo mfg: 50rd Basket Drum MG34 mainspring (new BRP repro) Hot Barrel Mitt  (both types available: FLAT PAD and MITT TYPE - please specify) - SEE PIC Booster Wrench Tool (both types available: CLOSED END and OPEN END Yugo Type - please specify)...

MG34 Sear Spring - New Production

Copy of original Sear Spring.   Pictured is a comparison between our new sear sprign and a worn original sear spring.   This part is incredibly important to full auto guns.  It helps prevent 'stutter-stop' and 'runaway' malfunctions.

BRP Photo CDs (2800 photos)

This 2 CD pack contains 2800 photos of MG34 parts and kits, MG42 parts and kits, a few MP40 pictures, and two FG42s.  Most of the pictures are from our cataloging of MG34 and 42 parts purchased domestically and abroad. They are sorted by catalog...