STEN Trigger Parts

STEN MkII Cut Parts Lot - Low Grade Condition

Original Items Condition: Low Grade - Generally as shown  (RUST and PITTING as pictured) These are parts that have been cut away from the receiver.  Only includes the sections shown.     The 'tabbed' type Sten MkII uses Drawn...

STEN MkII Cut Parts Lot - Good Condition

Original Items Condition: Good - Generally as shown (MAY HAVE MINOR RUST, PITTING) These are parts that have been cut away from the receiver.  Only includes the sections shown.     The 'tabbed' type Sten MkII uses Drawn Over Mandrel...

(FAIR) MkII Cut Receiver Parts: Fire Control Housing, Ejector, and Barrel Bushing

Original Items Condition: Generally as shown (MAY HAVE RUST, PITTING) These are parts that have been cut away from the receiver.  Only includes the sections shown.     The 'tabbed' type Sten MkII uses Drawn Over Mandrel (DOM) receiver...

Original Sten Trigger- Fair-Good (Newly Parkerized)

Original Item:  Sten Trigger Fair-Good Condition - Moderate Pitting / Blemishes Typically as pictured Newly Parkerized 

Original Sten Trigger- Very Good Condition (Newly Parkerized)

Original Item:  Sten Trigger Very Good Condition - Minor Blemishes Typically as pictured Newly Parkerized 

Original Trigger Mechanism Cover Mk. 2 (Newly Parkerized)

Original Item: Sten Mk. 2 Trigger Housing Cover  Markings may vary Newly Parkerized May have minor pitting/blemishes

STEN Cover, Trigger Housing - Dimple Mount Type - WORN Finish

Original item: worn condition but will work fine (as pictured) Dimple mount variation.  This is the dimple-mount-only variation.   Condition: Worn surface finish and blemishes generally as pictured.  

STEN Trigger Housing Cover Screw Set (reproduction 10-32 pattern)

Newly made items 2 Screws and 2 lock washers for 10-32 pattern Sten trigger housings. Some Stens use a smaller 8-32 screw but most of the British produced Stens use this larger 10-32 pattern screw for securing the cover to the trigger housing...

STEN Cover, Trigger Housing - Screw Mount Type - WORN Finish

Original item: worn condition but will work fine (as pictured) Screw mount variation. Screws not included. The other variations have a spring dimple mount only or both screw and spring dimple mount.  This is the screw-mount-only variation...

STEN Sear Pin - Newly Made

Newly made item copied from original  Hardened Steel Black Oxide Finish --------------  BE 9081

STEN Cover, Trigger Housing Screw and Dimple Mount Version - Worn Finish

Original item: worn condition but will work fine (as pictured) Screws not included Original item: worn condition but will work fine (as pictured) Screw & Dimple mount variation. Screws not included. The other variations have either a screw mount...

STEN trigger return spring - Newly Made Item

Newly Made Item   BE 9096

STEN Trigger Pin

Original item   BE 9085

STEN Tripping Lever Pin

Original item   BE 9083

STEN Tripping Lever (Good Condition)

Original item  GOOD CONDITION BE 9079

STEN Sear, Milled

Original item   BE 9092

STEN Trigger

Original STEN Trigger BE 9098

STEN MK V Rear Grip (original - new old stock)

STEN MK V original rear pistol grip