Vickers MMG Parts

Lot 1: Vickers MMG Parts Kit with Spares (ships free)

Actual Items Pictured
 Condition as shown Ships Free in Lower 48--- Good thing because this is HEAVY! Be sure to select free shipping in checkout   Includes:  303 Vickers MMG Parts Kit- Mixed Manufacturers The right side plate is...

Lot 241101-04: Vickers Machine Gun Auxiliary Mount - SHIPS FREE

Original Item. Actual Item Pictured. Condition as shown   "B" markings M/78 marking on ring   Identified on page 470 of Goldsmith's "The Grand Old Lady of No Man's Land" as: 534. The "Mounting, Monopod, Vickers, .303" MG, MK1",...

Vickers Dial Sight Mounting Pin Set

Longer setup for mounting the dial sight bracket to the left side of the Vickers MMG. Includes: "T" Pin Mk II (original Brit surplus) Rear Crosspiece Pin Assembly MK III (Includes Screw, Nut, & Retaining Wire) (original Brit...

Cover Joint Pin Assembly for Dial Sight Bracket - newly made

Includes Cover Joint Pin, Nut, Spring, Washers, & Retaining Pin This assembly is designed to keep pressure on the Vickers MMG dial sight bracket front support.  By lengthening the Cover Joint Pin and adding a spring we can better isolate the...

Vickers MMG Front Sight Blade - VAN marking

Original Item: front sight blade for Vickers MMG

Vickers MMG Front Sight Blade - VSM marking

Original Item: front sight blade for Vickers MMG

Lot 11: Vickers Left Side Plate Lot with Sight Bracket

Ships Free in Lower 48Be sure to select free shipping in checkoutActual Items Pictured
 Condition as shown Includes: Left Side Plate Screws have been installed in the holes as place holders   Mounting Pin Set Sight Bracket Original...

Lot 10: Vickers Left Side Plate Lot

Ships Free in Lower 48Be sure to select free shipping in checkoutActual Items Pictured
 Condition as shown Includes: Left Side Plate Screws have been installed in the holes as place holders   Mounting Pin Set Original Vickers...

Vickers Machine Gun Blank Firing Adapter - Worn Finish

Original Vickers machine gun blank firing complete 5 piece set: Cone Cup Blast Screw (adjusting) Lock Nut (adjusting) Wrench   Condition:  worn finish generally as pictured.  The threads and parts have been check for proper fit...

Vickers Split Pin 2 1/2" for Mk 4 Tripod Mounting

original item: common part in spare parts chest  2 1/2" for Mk 4 Tripod Mounting  

Vickers Tripod Crosshead Joint Pin and Elevating Gear Pin Set (low grade)

Original Item(s): Pins for Vicker's tripod    These are mostly black from the de-rusting process. Generally Low Grade Condition Many of the pins have Drill Purpose (DP) stamps  

Vickers Ejection Port Cover "Shutter" Catch

Original Item Catch piece only Condition as shown

Vickers Eliminator Low Grade

Includes 1 x Parabolic Blast Deflector / Eliminator (original).    Similar to ones pictured with rust and dents

Vickers Rear Sight Mk.4 - Fair Grade

Complete / Original:  Commonly included in spare parts containers   Possible Markings: VAN, VAC, EFD    Original Items in Low Grade Condition with wear and rust spot.    These have been check for proper function  

Vickers Rear Sight Mk.4 - Used Good Condition

Complete / Original:  Commonly included in spare parts containers   Possible Markings: VAN, VAC, EFD    Original Items in Used / Good Condition   Numbered  

Roller

Original Item:  Vickers roller  

Roller Collar

Original Item:  Vickers roller collar (retaining pin not included)

Vickers Lock Headspacing Washers No. 2 (repro), .005 Thickness

Newly made item:  common part in spare parts wallet for lock spacing   This is idential to the original except it does not have the pin punched holes to identify it as the No.2 washer.   Includes 1 x Vickers Lock Headspacing Washers No...

Vickers Lock Headspacing Washer (repro), No. 1 .003 thickness

Reproduction:  common part in spare parts wallet for lock spacing This is idential to the original except it does not have the pin punched single hole to identify it as the No.1 washer.   Included 1 x No. 1 Vickers Lock Headspacing Washers,...

Vickers 303 Barrel (excellent condition)

Original Barrels in excellent condition Australian (MA)

Vickers Safety Spring Assy

original item:

Vickers "T" Pin Mk I

Short type pin for retaining the rear grip assembly.

Vickers Lock Headspacing Washers No. 2 (.005 Thickness)

Original Item:  Common part in spare parts wallet for lock spacing. Includes 1 x Vickers Lock Headspacing Washers No. 2 (.005 Thickness) HAS BENDS    From “Handbook of the Vickers Machine Gun”   Test lock for...

RUSTED Crank Handle and Knob, Vickers MMG

Original Item: Low Grade with rust

Vickers Split Pin

original item: common part in spare parts chest    1"  for crank handle, roller   2 1/2" for Mk 4 Tripod Mounting   Specify Type

Vickers MkIII* Rear Sight

Vickers MkIII* Rear Sight used - good condition

Tripod Chain for Crosshead Pin

This chain is for the Crosshead Pin Joint.   Condition generally as shown without any finish.   No stud or washer    

Vickers Fusee with Chain

Vickers Spring, Fusee Assembly

Vickers "T" Pin Mk. II For Dial Sight Bracket

Longer type pin for retaining the rear grip assembly designed to work with the dial sight bracket.    

Vickers Rear Sight Mk.4 - Unnumbered Very Good Condition

Complete / Original:  Commonly included in spare parts containers   Possible Markings: VAN or VAC    Original Items in New Old Stock / Very Good condition with some storage wear   Unnumbered  

Vicker Tripod Elevating Gear Joint Pin (pictured bottom)

Vickers Tripod Crosshead Joint Pin (pictured top)

Original Item(s): Pin for Vicker's tripod  HAS MINOR PITTING

Vickers Eliminator (Newly Parkerized)

Original Item:  Parabolic Blast Deflector / Eliminator for a Vickers Newly Parkerized in our shop.  

Tripod Chain for Elevating Gear Joint Pin

This chain is used for elevating gear joint pin.   Condition generally as shown.

Chain, Muzzle Attachment

Attaches to muzzle and locks the assembly in place

Vickers Rear Cover Spring Lock

Vickers No.1 Brass Plug, Screw

Original Item: MC Marking Also fits Browning 1917

Rear Crosspiece Pin Assembly - for dial sight bracket

Included Screw, Nut, & Retaining Wire Longer setup for dial sight bracket

Vickers Cork Plug Chain Assembly

Vicker's Roller and Collar

Original Items: 2 pieces included Does NOT include the 1/8" x 1 1/4" keep pin.

19: PIN, axis, firing lever

Original Item:  

Vickers Muzzle Cup - Fair Condition (Newly Parkerized)

Original Item: Fair Condition - Pitting, blemishes  (as pictured) Markings Vary Newly Parkerized in our shop.  

Vickers Muzzle Cup - Very Good Condition (Newly Parkerized)

Original Item: Very Good Condition (as pictured) Markings Vary Newly Parkerized in our shop.  

VAN mfg Vickers Muzzle Cup - Very Good Condition

Original Item: Very Good Condition VAN Marking Includes: 1 x muzzle cup

VSM mfg Vickers Muzzle Cup - Very Good Condition

Original Item: Very Good Condition VSM Marking Includes: 1 x muzzle cup

Aussie mfg Vickers Muzzle Cup - Very Good Condition

Original Item: Very Good Condition Australian chrome pattern

HWW&CO Ltd mfg Vickers Muzzle Cup - Very Good Condition

Original Item: Very Good Condition HWW&CO Ltd Marking

Vickers Muzzle Cup - Low Grade Condition

Original Item: Low Grade Condition - generally as pictured

Vickers Muzzle Cup - Good Condition

Original Item: Good Condition - generally as pictured

Vickers Muzzle Cup - Very Good Condition

Original Item: Very Good Condition

24: Plug, Catch, Front Cover, Mk. 1

Original Item: - C1/BD0875 Drawing Number MGD 126