Product Description
MG-34 / XMG 308 Conversion (7.62 NATO)
1) Newly manufactured CHROME LINED barrel with original WW2 barrel collar
Barrel Material: CrMoV - GBQ
Commonly called "CMV"
Headspace is set to the 7.62 NATO spec. We can do the tighter .308 spec upon request.
Manganese Phosphate ("Parkerized") Metal Finish
This durable material was imported from a specialty steel manufacturer in Germany and is well suited for machine guns. It is also certified to meet MIL-B-11595E specification for US military gun barrels.
• Reduced diameter booster cone
• Front Feed Pawl that can be used for 8mm & 308
• Feed Tray Front Spacer: This spacer is designed to be removable from the tray so it can be switched back to 8mm if desired.
The 308 front spacer is installed by one 4-40 flat head screw on the bottom of the original 8mm feed tray. A countersunk hole must be added to the bottom the feed tray. BRP can make this modification for $50. Alternatively, customers can add this mounting hole by the following process:
MG34 7.62 NATO/308 Conversion Info
Belt Info: The 7.62 NATO case is slightly larger than the 8mm case, so these belt tend to hold 7.62 NATO ammo too tight.
- German 7.62 NATO belts work for both 8mm and 7.62 NATO
- Pre-1941 German solid / loose-type belts work or both 8mm and 7.62 NATO
- Late-War "low friction" Pattern and Yugo 8mm belts work for 8mm.
This setup will enable the MG-34/XMG to use WW2 belts or 308 MG1/MG3 belts.
The 308 belts tend to work better for feeding and stripping as they hold the larger case body less tight.
Product Videos
Videos Hide Videos Show Videos
Custom Field
Product Reviews
1 Review Hide Reviews Show Reviews
-
MG34 308 conversion
Great Kit , runs great , 308 ammo is cheaper than 8mm boxer prime non corrosive .
