MG42 Semi Auto Trigger Parts

XMG and MG42 Semi Bolt Hold Open Block

Bolt Hold-Open / Range Safety Device: Retract the bolt and insert this piece through the ejection port then release the bolt forward against it. This will allow you to change barrels and also signal that the XMG, MG34, or MG42 is SAFE. To remove,...

MG42 Safety Toggle Plunger Assembly

Newly made plunger assembly  Includes:  Plunger (stainless steel) Plunger Spring 2mm diameter retaining pin  

MG-42/53 Brass Catcher - Low Grade Condition

Original Item: Yugo manufacture Low Grade Condition with rust, dents, and/or tears in canvas

MG34 and MG42 Trigger Housing Pins (1 male, 1 female) - Newly Made

Trigger Housing Mount Pins: mounts trigger housing to receiver Newly Made Items Copied from the Original German Design Black Oxide Finish Includes:  1 Male Pin 1 Female Pin Finding original MG34/MG42 trigger housing pins can be...

MG42 Semi Grip Panel Set

Includes Left and Right Grip Panels for BRP Semi Auto Pattern Trigger Packs. Grips are newly made out of G-10 (high pressure fiberglass).   Mounting Screws and Nuts NOT Included.   For the semi auto trigger packs we had previously...

MG34/MG42/M53MG3 Rear Tripod Stud

Reproduction item. This is the rear tripod mounting stud made for standard German pattern tripods: MG34, MG42, M53, and MG3. Specs: Dimensions: 12 mm diameter x 51 mm long with an 1/8" mounting hole in the the center Finish: Black Oxide It can be...

MG42 Grip Screw/Nut - new production

New Production Grip Screws to Original Specifications. 1 screw and 1 nut per set. Each trigger pack requires 2 sets.   Reproduction  Dark Grey Parkerized Finish

Semi Auto Trigger Adapter (Housing Only)

Semi Auto Trigger Adapter: (HOUSING ONLY)   Does NOT include: AR Parts   The front of the original MG42 trigger pack must be machined (see prints), then this part is welded to the front of the original trigger pack. It is very important to...

MG42 Semi-Auto Safety Bar (Stainless)

Allows orignal safety toggle to function with AR-type trigger/hammer setup.  STAINLESS BAR AND PINS Include Bar, 2 pins and O-ring

MG42 Semi Trigger Pack (machined) Kit

Trigger Pack Kit: Includes: Frame, Safety Bar, Safety Bar Pins and Safety Bar O-ring.   Other parts required (not included in this kit) to complete the trigger pack: original grips (modification required) original safety toggle AR trigger,...

MG42 Semi Trigger Pack (machined)

*** Please send an email to info@brpguns to be put on the order list.***   Complete Semi Auto Trigger Pack with KNS Trigger/Hammer Pins for maximum durability Hammer Spring: Medium included only Grips are newly made out of G-10 (high pressure...

MG42 Grip Screw Tools - stainless steel

Set of specially made 1/4 in. drive bits fitted to the size of the MG42 grip screw and nut.   Stainless Steel

MG42 Safety Toggle

Original Item with newly made plunger assembly installed. Parkerized Finish: Likely post war German mfg. Compatible with MG42, M53, and MG3 trigger packs

MG34/42 Trigger Housing Pin Tools (Stainless)

MG-34/42 Trigger Housing Pin Punch Set. A must have for all MG34 and MG42 owners. The Pin Start tool has a conical lead-in that precisely compresses the 'male' 34/42 trigger housing pin spring tabs. The Pin Follower tool pushes the 'male' pin through the...

Medium Hammer Spring

Hammer Spring Types:  Medium:  good for just about all makes of 308 and 8mm Heavy: necessary for use with hard-primmered Yugo ammo and other old ammo prone to misfires

Heavy Hammer Spring

(for Yugo ammo)   **** Increasing hammer spring force will reduce firing pin life.  It can also result in pierced primers for some types of ammo.   Hammer Spring Types:  Medium:  good for just about all makes of 308 and...