Swedish M37/39 Individual Parts

KP31 Shroud Shim - .01" thick

Copied from original parts and made from stainless steel.   Thickness .01"   This part tightens the barrel jacket to receiver fit by 'shimming' the rear of the barrel shroud to receiver/trunion.   This is a very useful part for...

KP31 Suomi SEMI AUTO HEADSPACE pattern 9mm Barrel 16" Threaded 1/2-28

16" barrel for Semi Auto KP31.   Works with slant pattern KP31 shroud.  Will work with compensated shroud if the exit hole is opened to .635".   HEADSPACE on Closed Bolt Semi Auto Guns vs Open Bolt / Fixed Firing Pin Blow Back...

KP31 Shroud Shim - .002" thick

Copied from original parts and made from stainless steel.   Thickness .002"   This part tightens the barrel jacket to receiver fit by 'shimming' the rear of the barrel shroud to receiver/trunion.   This is a very useful part for...

Suomi 36 rd stick magazine

36rd original Finnish Suomi drum. Works with M31/KP31, KP44, M37/39, M45. (not for sale where prohibited) Excellent condition       MAGAZINE SHIPPING RESTRICTIONS   California Restrictions: 10 rounds, unless you can...

Suomi KP31, Swed M37, Stemple U9 Trigger Pack Sear Spring

M31 Trigger Pack Sear Spring for original KP31 and Stemple U series guns with Suomi pattern trigger packs

KP31 Barrel Shim - .001 thick

Copied from original parts and made from stainless steel.   Thickness .001"    These are the most thin we could make.  They are excellent for fine tuning your barrel to trunion to shroud fit.   This part tightens the barrel...

KP31 Shroud Shim - .005" thick

Copied from original parts and made from stainless steel.   Thickness .005"   This part tightens the barrel jacket to receiver fit by 'shimming' the rear of the barrel shroud to receiver/trunion.   This is a very useful part for...

Mainspring STG U9, 34k, & Suomi - New Production

New Production Mainspring for Suomi KP31, Swed M37, STG 76, Stemple Suomi, STG U9, STG 34k

Stemple STG 9mm Barrel 12.75"

12.75" barrel for BRP Stemple Takedown Guns.     Extractor Location The extractor relief on this barrel is setup for the BRP-Stemple extractors and would have to be enlarged to accommodate the KP31 extractor for full auto and semi auto...

KP31 Barrel Shim - .003 thick

Copied from original parts and made from stainless steel.   Thickness .003"   This part tightens the barrel to jacket fit by 'shimming' the rear collar of the barrel.   This is a very useful part for accurizing you gun or just fixing...

Suomi KP31 / Swed M37 Screws: Stock and Trigger

Includes the trigger screw and trigger screw keeper, and stock/tang screw

Suomi Drum Tool

Fitted tool for the Suomi Drum Feeder Arm for 1/4" hex drive tool.   It allows you to remove the arm for retensioning the drum.

M37 Rear Cap

Original Rear Cap in Excellent Condition

M31/37 Barrel Jacket Latch - 1 latch and 1 bushing included

Removed from original receiver 1 latch and 1 bushing included

M31/37 Mainspring

Original Mainspring