No.1 Mk.3 Stock & Magazine Parts

RFI Markings - No1 Mk III Demilled Drill Purpose Barreled Action - Good Brass Butt Plate

Receiver and Barrel have DP hole drilled through chamber area where the barrel screws into the receiver. Rusty Exterior on barrel and receiver The bores are generally good Receiver has been cut (as pictured) NOTE: there’s approx 1/2"...

SMLE No. 1 Magazine Early Type - Unnumbered

Original British production SMLE magazine for No. 1 (early type) .303 Magazine Case (variation 3) complete with Follower (variation 2): Hand-Select Pictured

SMLE No. 1 MK III Magazine - Fair Condition

- Original British production SMLE No. 1 MK III magazine, for .303 Brit. - Functional Condition but with some minor surface pitting (inside and outside of magazine) - Good Grade Follower and Spring - Condition is generally as show as pictured - Most...

Rare Original LINLEY & Co SMLE No. 1 MK III Magazine - Unnumbered - Good Condition

Rare Original No1 MKIII SMLE Magazine made by LINLEY & Co    Original Item: 10 rd magazine for the .303 No1 MKII SMLE   UK Markings with manufacturer stamp “LINLEY & Co” on both the follower and magazine...

Rare Original LINLEY & Co SMLE No. 1 MK III Magazine - Unnumbered - Very Good Condition

Rare Original No1 MKIII SMLE Magazine made by LINLEY & Co    Original Item: 10 rd magazine for the .303 No1 MKII SMLE   UK Markings with manufacturer stamp “LINLEY & Co” on both the follower and magazine...

SMLE No. 1 MK III Magazine - Unnumbered - Very Good Condition

Original British production SMLE No. 1 MK III magazine.  For .303 Brit. Unnumbered Has most of the blue finish Very Good condition with minor surface wear, dents, and patina QUANTITY: 1

SMLE No. 1 MK III Magazine - Low Grade Condition - with Dents

- Original British production SMLE No. 1 MK III magazine for .303 Brit. - Feed lips may need minor adjusting for proper feeding - Functional Condition but with some dents and/or surface pitting (inside and outside of magazine) - Low Grade Follower and...

SMLE No. 1 Mk. 3 Magazine - Numbered - Very Good Condition

Original British production SMLE No. 1 MK III magazine for .303 Brit.  Feed lips may need minor adjusting for proper feeding. - Very Good Condition, Numbered Magazine Case (rifle serial number, minor dings/dents) - Very Good Condition...

SMLE No. 1 MK III Magazine - Unnumbered - Excellent Condition

Original British production SMLE No. 1 MK III magazine.  .303 Unnumbered QUANTITY: 1   Excellent condition with minor surface wear/blemishes  

SMLE No. 1 MK III Magazine - Good Condition

Original British production SMLE No. 1 MK III magazine. For .303 Brit. Good Functional Condition Feed lips may need minor adjusting for proper feeding Condition is generally as show as pictured Minor blemishes (pitting/dents) with low surface finish...

Damaged No. 1 Mk. 3 Magazine Lot

Original Item(s):  x3 Damaged No.1 Mk.3 Magazines (Rusted, Pitted, Dented, Broken) x3 Damaged No. 1 Followers (Rusted, Pitted, Broken) x3 Funtional Auxiliary Springs

8: BAND, outer - No Visible Markings (Fair / Good Condition)

Original item: Brit Part Number: BB 0652 No Visible Markings  1 assembly included Fair / Good condition with minor pitting, bends, light bluing, and/or surface blemishes similar to the sample pictured.

8: BAND, outer - No Visible Markings (Very Good Condition)

Original item: Brit Part Number: BB 0652 Very Good Condition No Visible Markings  1 assembly included

8: BAND, outer - British Markings (Low Grade Condition)

Original item: Brit Part Number: BB 0652 British Markings  1 assembly included   Low Grade condition with significant pitting, bends, and/or surface blemishes (similar to the ones pictured)    

8: BAND, outer - British Markings (Fair / Good Condition)

Original item: Brit Part Number: BB 0652 British Markings  1 assembly included Fair / Good condition with minor pitting, bends, light bluing, and/or surface blemishes similar to the sample pictured.

8: Band, outer (Newly Parkerized)

Original item: Fair-Good Condition  May have minor pitting BB 0652 Newly Parkerized in our shop

8: BAND, outer - British Markings (Very Good Condition)

Original item: Brit Part Number: BB 0652 Very Good Condition British Markings  1 assembly included

10: SWIVEL, sling, Mk. 1 (Newly Parkerized)

Original Item: Has been Parkerized in our shop, but is an original item. May have minor pitting

SMLE Sling Swivel x10 (Damaged)

Original Item: - Bent, Welded, Broken, or Pitted    

10 - SWIVEL, sling, Mk.I

10 & 42 Plate B, original item.  For both No1 and No4 rifle swivels, Front & Rear. 2 required per rifle BB 8043

11 - SCREW, swivel - NEW OLD STOCK Condition

11 & 43 Plate B:  original item.  BB 8037.  For both No1 rifle swivels, Front, Rear, & Stacking   NEW OLD STOCK CONDITION Excellent finish and slot

11 - SCREW, swivel - Worn Condition

11 & 43 Plate B:  original item.  BB 8037.  For both No1 rifle swivels, Front, Rear, & Stacking   Worn Condition: There may be major wear in the screw slot and/or finish.

11 - SCREW, swivel - Very Good Condition

11 & 43 Plate B:  original item.  BB 8037.  For both No1 rifle swivels, Front, Rear, & Stacking   Very Good Condition: There may be very minor wear in the screw slot and finish.

12: CAP, nose (unnumbered, fair-good cond.)

Original Item:  BB 0667 British markings No serial number stamped on bayonet support lug Fair/Good condition with some wear / blemishes / rust / pitting- generally as pictured.

12: CAP, nose (unnumbered, exc. cond.)

Originla item: BB 0667   No serial number stamped on bayonet support lug

12: CAP, nose (Good)

Original Item: BB 0667 Used - Good Condition with Serial Number Stamped on Bayonet Lug May have minor rust / pitting

13: NUT

Originla item: BB 0700

14: nose, SCREW, back- Very Good Condition

original item Very Good Condition dark finish very good screw slot on head BB0728

14: nose, SCREW, back (worn head)

original item BB0728

15: nose, SCREW, front (EARLY PATTERN - head 6.3mm diameter - countersunk type) WORN HEAD

original item BB0729 head diameter 6.3 with countersunk feature to fit nose piece.   Low Grade & Worn Head. The screw slot is marred and/or misshapen. The finish is low. This is the earlier type (MkIII vs MkIII*).   Research...

15: nose, SCREW, front (EARLY PATTERN - head 6.3mm diameter - countersunk type)

original item BB0729 head diameter 6.3 with countersunk feature to fit nose piece. This is the earlier type (MkIII vs MkIII*).   Research indicates that the smaller (countersunk) screws were changed to larger heads to facilitate removing...

15: nose, SCREW, front (MkIII pattern - head 8.5mm diameter)

original item BB0729 head diameter 8.5mm Wear on head generally as pictured.  Most have very little finish remaining. This is the later type (MkIII*).   Research indicates that the smaller (countersunk) screws were changed to larger...

15: nose, SCREW, front (MkIII pattern -head 9.5mm diameter)

original item BB0729 head diameter 9.5mm (NO FINISH ON SCREW HEAD)   This is the later type (MkIII*).   Research indicates that the smaller (countersunk) screws were changed to larger heads to facilitate removing with the rim of the...

16: SWIVEL, piling, "B" - Stacking - Good (no markings)

Original Item: BB 0773 Good condition: Minor pitting, minor bends, and/or low finish generally as pictured Unlike the other piling swivels, these don't have any visible markings. Pattern may vary from picture.

16: SWIVEL, piling (Newly Parkerized)

Original Item: No1. Mk3 Piling Swivel Newly Parkerized BB 0773

16: SWIVEL, piling, "B" - Stacking - Low Grade (no markings)

Original Item: BB 0773 Low Grade condition: Possible Moderate Pitting, Moderate Bends, and Moderate Rust Unlike the other piling swivels, these don't have any visible markings. Heating the metal before straightening is recommended. Pattern may vary...

16: SWIVEL, piling, "B" - Stacking - Low Grade

Original Item: BB 0773 Low Grade condition: Possible Moderate Pitting, Moderate Bends, and Moderate Rust Worn Finish, British Markings Heating the metal before straightening is recommended. Pattern may vary from picutre.

16: SWIVEL, Stacking for No1 Mk6 SMLE

original item  No1 Mk6 SMLE with broadhead stamp

16: SWIVEL, piling, "B" - Stacking - Good

Original item: BB 0773 Good Condition - Possible Minor Bends, Minor Pitting, Minor Rust Worn Finish - British Markings Pattern may vary from picture

17 - SCREW, swivel - Very Good Condition

17 Plate B:  original item.  BB 8037.  For both No1 rifle swivels, Front, Rear, & Stacking   Very Good Condition: There may be very minor wear in the screw slot and finish

17 - SCREW, swivel - Worn Condition

17 Plate B:  original item.  BB 8037.  For both No1 rifle swivels, Front, Rear, & Stacking   Worn Condition: There may be major wear in the screw slot and/or finish.

18: Front Handguard Assembly - no ears - Original (POOR)

Original item: INVENTORY PICTURE. These were arsenal modified with ears removed. Color and condition as pictured.   1 PIECE INCLUDED THESE ARE POOR GRADE SETS, GENERALLY AS PICTURED, WITH VISIBLE REPAIRS, DENTS, RUSTED NOSE CAPS, MODERATE/SEVERE...

18: Front Handguard Assembly - no ears - Original (LOW GRADE)

Original item: INVENTORY PICTURE. These were arsenal modified with ears removed. Color and condition as pictured. 1 PIECE INCLUDED THESE ARE FAIR GRADE SETS, GENERALLY AS PICTURED, WITH VISIBLE REPAIRS, MISSING REPAIR MARKS, DENTS, RUSTED NOSE CAPS,...

18: Front Handguard Assembly - no ears - Original (FAIR)

Original item: INVENTORY PICTURE. These were arsenal modified with ears removed. Color and condition as pictured. - NO REPAIR MARKS - RUSTED END CAP - MAY HAVE MiNOR WARPING / MINOR CRACKS IN WOOD / STAINS - COLOR REQUEST AVAILABLE BUT NOT...

19: CAP, nose front handguard

Originla item:   BB 0666

21: REAR Handguard Assembly - no ears - Original (POOR/LOW GRADE)

Original item:  These were arsenal modified with ears removed INVENTTORY PICTURE 1 PIECE INCLUDED THESE ARE LOW GRADE SETS GENERALLY AS PICTURED WITH VISIBLE REPAIRS, DENTS, RUSTED SPRING, MODERATE/SEVERE CRACKS, AND BLEMISHES AS SHOWN - COLOR...

21: REAR Handguard Assembly - no ears - Original (FAIR)

Original item:  These were arsenal modified with ears removed 1 PIECE INCLUDED May have: - REPAIR MARKS / MISSING REPAIR MARKS - MINOR CRACKS (REPAIRABLE WITH SUPER GLUE OR WOOD GLUE) - DINGS/BLEMISHES - COLOR REQUEST AVAILABLE BUT NOT...

22: SPRING

Originla item:          22: SPRING 22-no1B   BB 0753                 WITHOUT RIVETS

23: PIN, Trap butt plate

Original Item:   BB 0714 /   BB 8592

25: GUARD, trigger (type B)

original item Loop at front of magazine insert BB 0687

25: GUARD, trigger (type A)

original item Swivel bracket mount at front of magazine insert

27 - SCREW, Trigger Guard, Rear (round head, pictured left)

27 Plate B, original item, BB 8610.   Rear Trigger Guard Screw   Round Head for No1.  Pictured far left  On the Round Head Screws: most of the screws slots are distorted but the threads are good.