Vickers Tools and Accessories

Lot 241101-04: Vickers Machine Gun Auxiliary Mount - SHIPS FREE

Original Item. Actual Item Pictured. Condition as shown   "B" markings M/78 marking on ring   Identified on page 470 of Goldsmith's "The Grand Old Lady of No Man's Land" as: 534. The "Mounting, Monopod, Vickers, .303" MG, MK1",...

MK.1 Combination Tool

These early combination tools retained the socked for unscrewing the miuzzle cup retaining screw.  The pattern was replaced in 1918 by the Mk.2 pattern also available for sale on our site.

AUSTRALIAN Vickers MK2 Combination Tool - Good Condition

Original Item:   Australian Markings.   Most are "MA"   Standardized pattern in 1918   Overall good condition with minor blems and some surface wear.  The functional elements of the wrench are in...

Vickers MK2 Combination Tool - Good Condition

Original Item:   "JE" Markings   Standardized pattern in 1918   Overall good condition with minor blems and some surface wear.  The functional elements of the wrench are in very good condition...

Vickers MK2 Combination Tool - Very Good Condition

Original Item:   "JE" Markings   Standardized pattern in 1918   Overall very good condition with minor blems and some surface wear.  The functional elements of the wrench are in very good condition...

Vickers MK2 Combination Tool - Fair Condition

Original Item:   "JE" Markings   Standardized pattern in 1918   Some blems and minor pitting generally as pictured.  The spigot lugs are sometimes worn but still useable (see pics).    

Vickers MK2 Combination Tool - Low Grade Condition

Original Item:   "JE" Markings   Standardized pattern in 1918   Some blems and minor pitting generally as pictured.  The spigot lugs are worn and will require some work to be useable.    

Vickers Parts Tin, Oil Bottle, Striker, Sear, Spring, and Cleaning Rod Lot

Original Items: Includes 1 x Vickers Parts Tin - Good/Fair condition 1 x Vickers Mk1 Oil Bottle - Good/Fair conditio 2 x Mk2 Striker 2x Mk2 Striker Spring 2 x Sear 1 x CANADIAN ARMY CLEANING ROD FOR VICKERS/LEWIS  Markings: "HWC"...

Vickers Striker, Spring, and Cleaning Rod Lot

Original Items: 3 x Mk2 Striker 3 x Mk2 Striker Spring 1 x Roller 1 x CANADIAN ARMY CLEANING ROD FOR VICKERS/LEWIS  Markings: "HWC"  and Canadian Broad Head Stamp Long one piece design Length: 40" under handle Condition: New...

British Armourer's Tool - Brace

Original Item: Brace only (Tools not included) Typically there are no markings other than a small broad head stamp somewhere on it. These are used with tools/bits that fit into the square socket on the end.     External Informational...

Lot 11: Vickers Left Side Plate Lot with Sight Bracket

Ships Free in Lower 48Be sure to select free shipping in checkoutActual Items Pictured
 Condition as shown Includes: Left Side Plate Screws have been installed in the holes as place holders   Mounting Pin Set Sight Bracket Original...

Lot 10: Vickers Left Side Plate Lot

Ships Free in Lower 48Be sure to select free shipping in checkoutActual Items Pictured
 Condition as shown Includes: Left Side Plate Screws have been installed in the holes as place holders   Mounting Pin Set Original Vickers...

Lot 240723-02: Vickers Tools and Pins Lot

Original Items: Actual Items Pictured Conditions as Shown   Includes: 2x broken shell tools 2x Vickers Tripod Elevating Gear Joint Pins 2 x Vickers Tripod Crosshead Joint Pins (1 has missing retaining stud with DP mark)

Small Parts Tin (for wallet) - Post War - Low Grade Condition

Commonly used for spares or cleaning kits with a variety of British small arms.   Most are dated 1950s.  They are all painted flat green as pictured.   Dents and Rust spots as picture but still usable.

Brit 303 Clearing Plug (second pattern) FAIR CONDITION

Otherwise known as a broken shell or ruptured case extractor for .303 Brit. Commonly used for Vickers and BREN machineguns.   These are fair condition sets with some surface pitting as pictured. 1 Clearing Plug Included

Brit 303 Clearing Plug (second pattern) VERY LOW GRADE

Otherwise known as a broken shell or ruptured case extractor for .303 Brit. Commonly used for Vickers and BREN machineguns.   These are lower grade sets with major surface pitting as pictured. 1 Clearing Plug Included

Vickers Tripod Crosshead Joint Pin and Elevating Gear Pin Set (low grade)

Original Item(s): Pins for Vicker's tripod    These are mostly black from the de-rusting process. Generally Low Grade Condition Many of the pins have Drill Purpose (DP) stamps  

Vickers Eliminator Low Grade

Includes 1 x Parabolic Blast Deflector / Eliminator (original).    Similar to ones pictured with rust and dents

Original Vickers MMG And Lewis Cleaning Rod - Canadian Markings - Hand Select

Original Item: CANADIAN ARMY CLEANING ROD FOR VICKERS/LEWIS Markings: "HWC"  and Canadian Broad Head Stamp Long one piece design Length: 40" under handle Condition: New Old Stock in heavy grease 

Original Vickers MMG And Lewis Cleaning Rod - Canadian Markings - Minor Blems

Original Item: CANADIAN ARMY CLEANING ROD FOR VICKERS/LEWIS Markings: "HWC"  and Canadian Broad Head Stamp Long one piece design Length: 40" under handle Condition: New Old Stock in heavy grease with some very minor blems on patch loop...

SM 125 Armourers plug - Bore Reject Gauge for 303 (.307" diameter)

"SM125 Armourer's plug gauge .307" - Bore reject - Rifles No 4 & 5, inserted at muzzle end. Must not enter muzzle more than 0.25 inch. SM125 has an engraved line at the end showing this measurement. For Vickers M.G. SM125 must not enter...

Small Arms Oil Can Mk.3 Square Pattern- Low Grade

Brush-top oil can commonly issues for Bren and Vickers during WW2   Low Grade:   Dents and Rust

Small Arms Oil Can Mk.3 - Low Grade

Brush-top oil can commonly issues for Bren and Vickers during WW2   Low Grade:   Dents and Rust

SM 126 Armourers plug - Barrel Reject Gauge for 303

"SM126 Armourer's plug gauge .308" - Barrel leed wear at commencement of rifling. Vickers gun - inserted at chamber end. Must not enter more than 0.25 inch. This is indicated when the screwed end of the gauge is 0.30" proud of the breech. Rifle No. 4 -...

MN marked Clearing Plug

Original Item Actual Item Pictured   Otherwise known as a broken shell or ruptured case extractor for .303 Brit.     Machined handle type made by "MN"   From all of the clearing plugs we've seen over the years this is the only...

Collection of Four VSM Clearing Plugs

Original Items Actual Items Pictured All Marked "VSM" (Vickers, Sons & Maxim)   From all of the VSM marked tools we've seen over the years, here's a collection of the VSM variations we found.  Three of them have the machined handle, one...

Vickers, Lewis, & BREN Clearing Plug (first Pattern) Forged Handle

Otherwise known as a broken shell or ruptured case extractor for .303 Brit. Marked "VSM" (Vickers, Sons & Maxim) Forged Handle Type   All have visible manufacturer and proof markings. Commonly used for Vickers and BREN machineguns...

Vickers Parts Lot 072418-01

Original Items:   2 x Vickers Lock Spring No.2 2 x Vickers Firing Pin No.2 2 x vickers oil bottles (LOW GRADE) 1 x Roller (LOW GRADE but could be functional) 1 x extractor - stripped (LOW GRADE but could be functional)

Small Parts Tin (for wallet) - Post War - Very Good Condition

Commonly used for spares or cleaning kits with a variety of British small arms.   Post War British mfg in very good condition.  Some very minor dents and scratches on most.    Most are dated 1950s.  They are all painted flat...

Belt Repairing Tool (pliers) with 10 Rivets

Pliers are original.  These are the common WW2 pattern that are marked on the handle as pictured rivets are newly made reproductions.

SM 139 Armorers Headspace Gauge for 303 - .064"

Original (new in wrap) WW2 era Armourers Headspace Gauge. SM 139 – Armourers, headspace, .064 in., No. 1     They are typically used for the SMLE, BREN and Vickers to measure firing pin protrusion. .064"   Useful Info Info...

Vickers Foresight Bar

Original, in excellent condition   Foresight, Bar, Deflection, Mark 1:  Designed to attach to foresight compensate for wind for long range firing

British Flexible Cleaning Rod

Original flexible copper cleaning rod

Vickers Water Can Cap (Qty: 1)

Made for standard two-gallon water / gas can   Pattern may vary   Does not include leather gasket   Includes 1 cap

Vicker Tripod Elevating Gear Joint Pin (pictured bottom)

Vickers Tripod Crosshead Joint Pin (pictured top)

Original Item(s): Pin for Vicker's tripod  HAS MINOR PITTING

Small Parts Tin (for wallet) - early pattern - low grade

Commonly used for spares or cleaning kits with a variety of British small arms.   Most have either: WW2 Date   OR   L&S markings   These are the earlier ones that are grey in color.   Dents and Rust spots as picture but...

Small Arms Oil Can Mk.3

Brush-top oil can commonly issues for Bren and Vickers during WW2

Vickers Oil Can Mk.1 Half Pint

Adopted in 1915, Brush-top Both early and late types available. Condition: Minor dings and surface blems

Vickers Eliminator (Newly Parkerized)

Original Item:  Parabolic Blast Deflector / Eliminator for a Vickers Newly Parkerized in our shop.  

Vickers Aiming Post Mk.3

Sighting tripod used in conjuction with lamp as part of a controlled night firing scheme.   Fair Condition with rust but will clean-up well if dip stripped and repainted.

Resector Protractor Case (protractor not included)

Big discount for cases without instructions.

Pegs, Night Line, M.G., Mk. I

Original night line firing peg set:  3 Pegs (two 18", one 9"), 1 collar

Vickers Oil Can Mk.2 Half Pint

Adopted in 1918 Minor dings and surface blems as pictured  

Belt Repairing Tool (pliers) with WW1 Date

Original belt repair pliers with WW1 date   These are designed to fix the rivets on tabbed vickers belts. The dates on these range between 1914 and 1918

Vickers, Lewis, & BREN Clearing Plug (first Pattern) Machined Handle

Otherwise known as a broken shell or ruptured case extractor for .303 Brit.   Early Machined Handle Type   Marked "VSM" (Vickers, Sons & Maxim)   All have visible manufacturer and proof markings. Commonly used for Vickers...

Brit 303 Clearing Plug (second pattern)

Otherwise known as a broken shell or ruptured case extractor for .303 Brit. Commonly used for Vickers and BREN machineguns.

Wire Gauze

Common Part for cleaning rusted bores on all Commonwealth small arms 

Mk.2 Muzzle Protector

Screws on the end of the barrel to protect the muzzle

Vickers Punch No.5

Vickers Belt Repair Tool - Plug

Original Vickers Steel Belt Repair Plug

Vickers Sighting Tripod Reflector Cover (original item)

Original item